You think that utilising a rotary hammer is dangerous and tough. The loud noise and powerful operation of the tool scare you, and this stops you from ever using it for your DIY project?
Let’s forget the fright of the tool; it won’t be harsh for you anymore. Learn how to use hammer drill through this post now!
Understand How Hammer Drill Works?
In the beginning, we need to differentiate a bit between percussion drills and regular ones. A rotary tool is much faster and easier to operate than a regular one.
A rotary tool has a cam-action process, aka percussion hammering mechanism.
There are two sets known as toothed gears, which will interact with each other to create parallel power: drilling and hammering. These actions are done simultaneously to make a hole in the particular areas.
How To Use Hammer Drill In Every Step?
There are more things that you need to know to utilize the equipment effectively. The four guiding steps below are the main point for you to concentrate on.
Step 1: Make Sure Your Drill Powered
The tool needs the power to operate. So, make sure that the electrical plug is near or your cable is long enough.
The basic knowledge about electric devices is to operate them before using them. This can help you to know if the power is ready or not. Also, this will reduce risk while you are handling it.
Step 2: Being In Comfortable Position
The workspace should be tidy and clean for using machinery like hammering drills. Besides, your working space must be large enough and free of any obstacle objects. Do not forget about the area where you stand as well. If your body and foot are not in the right positions, your shooting can not be perfect.
Using a groundsheet under the drilling area can be helpful after the process. The dust from the concrete or woods will be in the right place, groundsheets, due to the debris can even fly out and slobber the surrounding area.
Step 3: Marking The Holes On The Drilled Area
Planning where to train and double-check for the carefulness. It may be harder to mark the wrong place and then fix it. Just take your time and, step by step, choose and mark holes in the right places.
Marking holes
You can utilise a ruler or a measuring device for the better parameter, as every millimetrer can be out of the line if you don’t use a measuring tool. In addition, some drills may have a depth stopping in the stick – prepare the depth by noting the area if you care about the depth.
Step 4: Drilling In An Appropriate Time
The depth of the roto-tool stick and the drilling time are related. If you over pierce the hole, it can be out of the wall and destroy the structure you want. You should know when to stop, and practising more can help you get this skill.
Commonly, you need to bore a bit to get the depth you want from the bore stick. It’s like a couple of seconds, just push and pull in seconds. When you practice more, you will feel and know exactly when you stop.
Helpful Tips When Using Hammer Drill
- Do not use all of your strength back to the area you want to make a hole. This overstrength may run too far, and the hole size may be bigger than you need.
- Always wear protective clothing, including safety glasses, as the dust can make your eyes uncomfortable and even dangerous.
- If you want to reduce the heat and friction while drilling, running some water on the wanted area can be helpful.
The Bottom Line
Once you learn how to use hammer drills correctly and safely, the tool will surely be your good companion in every DIY project!
You can do machinery works by getting acquainted and practising them. Good luck!