It is not an exaggeration to say that pressure washers are the best tool ever. They are a friend indeed of every house since they always make the cleaning process more convenient.
You can use a pressure washer to remove all the stinky and stubborn grease and grime on the driveway, decking, or fencing. To make it work, you have to connect all the fittings properly before cleansing.
As you have known, pressure washers come in variants of brands. Still, they are generally in two forms only: electric and petrol. And in this post, we will show you how to connect pressure washer in terms of those two kinds.
Now, let’s dive in.
How To Connect Pressure Washer? A detailed guideline
After buying, it is advisable for you to read through the operation manual going along with the pressure washer. It would be best to spend some of your time acquainting yourself with different machine elements and follow the instruction to make it work efficiently and safely.
How to connect a petrol pressure washer?
How to connect a petrol pressure washer
Step 1: Check the oil tank
It is necessary to check the oil tank beforehand to make a petrol pressure function smoothly.
For doing that action, the needy thing is to take out the tank’s oil dipstick and check the oil levels inside it to see if there is enough left.
Whenever the oil runs low, you need to refill it, yet remember not to overfill the machine’s crankcase.
Step 2: Fill up the fuel tank
After checking the oil level, the next thing you have to do is to pour fuel into its tank. Just a reminder, you only need the right amount to make it function, so do not go over the limit level.
Usually, the pressure washers will use petrol as fuel, but some high-end and larger ones may use diesel instead.
Step 3: Arrange the spray gun
You only need to connect the extension wand and tighten it into the spray gun in this step.
Step 4: Organize the high-pressure hose
Connect one end of this hose to the spray gun and the other one to the inlet on the device. Then, stiffen all joints.
Step 5: Attach to the water source
Connect one end of the hose to your garden faucet and switch on to let the water run through till it’s clear.
Then, shut off the water so you can connect the hose to the water inlet. Next, it’s time to tighten all the connections and turn the water supply back on.
After finishing this step, your machine is ready to start.
How to connect an electric pressure washer?
How to connect an electric pressure washer
Step 1: Set up the spray gun
Joint the extension wand to the spray gun and lock it in the right place. As you may not know, several rods come with interchangeable tops for various spray patterns and volumes.
Step 2: Attach the high-pressure hose
Connect and tighten the high-pressure hose to the inlet you usually see on top of the water inlet.
Step 3: Set up the water hose
Connect a coupler attachment onto the hose. Attach one end of the coupler to the machine’s water inlet and let the other side free to thread to any fittings later. Next, you take another end of the pipe and connect it to your garden hose.
Please make sure to generate the machine when you have a sufficient water supply.
Step 4: Connect the pressure washer to the power source and turn on the machine
In this step, you only need to plug the cord to the inject and press the On button to function.
Then, you can pull the trigger to send the water out and clean your things.
Final words
After reading this article, we hope you can learn how to connect pressure washer based on your machine type. Good luck with your work. Thank you for reading and see you next time!