In the technology boom era, more and more electronic stuff emerges, which facilitate humans in many aspects of life. Lawnmower robots are amongst those most-seek new tech products. However, installing the machine would be quite a challenging task for those who are low-tech or first time users.
If you are one of them, this blog is for you! Let’s find out how to install robot lawn mower in this article now! Scroll down!
How To Install Robot Lawn Mower In 6 Quick Steps?
A robot lawn mower can make your life much easier, but firstly, it needs installing properly. Being an expert in operating machines for many years, we will share these simple steps for you to run it seamlessly.
Step 1: Making The Yard Be Ready.
It’s vitally essential that you take note of every barrier where you want the grass cutter to keep off. Then, place the boundary wires around them.
Remember to collect all the scraps and tree twigs that the machine might encounter. The cleaner the yard is, the better the robot works.
Step 2: Setting Place For The Charging Station And Charging It
Put the charging station on a flat floor near the cut area with some empty area surrounding it. There should be seven feet of empty area at the minimum.
Ensure that the station stays away from sunlight, sprinklers and is adjacent to an electric receptacle.
Step 3: Positioning The Boundary Wires
Next, place the boundary wires by the side of the grassland by utilizing staples and a hammer. Putting the wire a couple of inches underneath the ground is a great idea.
In addition, utilize a cardboard ruler to calculate the distance to set down the wire from the sides of your lawn cutter.
Step 4: Locating The Guidewire
You can set up the guidewire after allocating the boundary wires in a fixed place. To be more specific, this wire aims to make the cutter know how to go back to the charging station when needed.
If you have no idea where to put it, try connecting one end directly across the furthest point in your garden for the lawnmower to find it.
Step 5: Connecting Charger With The Ends Of The Wires
Once all the wires are stable, their ends have to be connected to the charging station. There are four spots for the wires when you unfasten the back of the charging station.
When you’ve finished attaching the wires to the designated spots, you had better bond the charger to the surface with an Allen wrench and screws.
Step 6: Starting The Machine And Relax
Now that you have done all the preparation stages, it’s time to launch the machine and take a rest.
Just unlock the flap on the equipment and adhere to the steps written inside to operate it. This step will require your four-digit pin to accomplish. Look for the guidelines on the Internet or the product’s website if you don’t know what it is.
By using machine adjustments, you can modify various segments of your lawn. Simultaneously, it also includes the time-setting function, helping users schedule when the appliance should work.
We suggest setting the lawn’s height to be cut to the highest at first. After that, when the equipment has cropped the lawn to this height, you can modulate to your wished height.
Frequently Asked Questions
Should I Keep Using The Robot Lawn Mower Year-Around?
This appliance has a mechanism that optimizes itself to work in all weather conditions, except for extremely turbulent conditions. In these situations, you should move it inside to prevent damage.
Is Robot Lawn Mower Rowdy?
Fortunately, its sound level is approximately around 60 dB, which is very little. Leaving it running in the garden will not annoy you.
Conclusion
We’ve just tackled the problem “how to install robot lawn mower” for those not accustomed to using technology. As you can see, within only six steps, we can automate the process and save a great deal of time.
Hope you will like this magic machine.