Do you intend to have a DIY project at your house? Then a mitre saw is of great assistance to make your jobs much more comfortable to carry out.
However, the problem is that you have no idea of using this powerful tool? Well, do not worry too much as we are here to help. Do not hesitate to give our in-depth guide on how to use a mitre saw a check!
Table of Contents
How To Use A Mitre Saw
Choose The Suitable Mitre Saw
These mitre saws come to the market with different types, sizes, and electrical power. That’s why you have to choose a suitable tool before using it. Let’s get started`.
In more detail, a mitre saw comes with three typical types, including a standard, compound, and sliding one. The standard tool allows you to cut the material perpendicularly at a range of angles from 45 degrees left to 45 degrees right.
Meanwhile, the compound one is able to make the mitre and bevel cuts by tilting the blade to a certain angle on its axis. When it comes to the sliding mitre saw, it can cut through a much broader and thicker piece of material as its sliding arm lets the blade slide out away from the fence.
Size And Power
In terms of size, the mitre saw is available in 8 to 12-inch options. It determines how wide and thick the stock you can cut.
On top of that, it is a must to pay attention to deciding how much the electrical power your tool needs. Let’s opt for a standard machine powering from 12 to 15 Amps for basic needs or an industrial rated one for more robust projects.
We believe that it is much more effortless to choose the most suitable tool after considering all these features. Of course, it is up to your needs and budget to decide on purchasing or borrowing one.
Set Up The Working Area
Let’s set up the working area to ensure that you can operate the mitre saw comfortably. Your particular working area should be large enough to handle such long stock. Besides, setting up a table or a workbench to place the saw is another good idea.
Learn About The Performance Of Each Part In A Mitre Saw
Beginners will find it challenging to use a mitre saw if they are not knowledgeable enough about this tool. For this reason, you should learn about all the parts of the machine and their performance.
But first, let’s read the manufacturer’s manual. This act will show you how to operate a safe process. For example, you are knowledgeable enough to use the right extension cord and sufficient power source to avoid any damage to your saw or fire in your working area.
Up next, grasping the position of all the parts on a mitre saw is crucial too. On the front of the saw, let’s find where the angle scale and indicator are placed. Besides, do not forget to learn the operating mechanism of the blade guard, a power switch, the locking system, laser guides, and saw tilt scales.
Release The Saw
You have to release the saw to put the stock on the bench. After that, let’s try to raise and lower the saw blade several times before you turn the machine on. It will make you familiar with the cutting path in order to avoid any accidents during the actual process of sawing.
Test The Saw With A Piece Of Material
Then, you should test the saw with a piece of scrap material placed on the bench. Make sure that this stock is long enough for you to keep it in position while cutting without dropping any piece. In this case, there is no need to use clamps as well.
Try Cutting Different Angles
The next step to do is to saw the scrap material at many different angles and join them to see if they can fit well. You need to determine the angle of the joint and divide it into half to have the specified angle of each piece of stock.
Practice Until You Get Used To The Saw
After knowing how to join the material at a given angle, you had better practice as much as possible until getting used to the machine. It will be beneficial for you to avoid making a mistake while actually making the cut.
But remember to measure and mark on where you want to cut at the workpiece. Of course, a square might be of great assistance to ensure preciseness.
Conduct Your Project
A whole process to use a mitre saw is quite simple. Specifically, you need to hold the material with one hand, check the cutting position by bringing down the blade, lift it back up, and press the switch to full speed.
Then, lower the saw blade through the stock slowly, let go of the trigger, and lift the knife back up when the machine stops completely. It is simple, right?
Now you can join hands with doing your project by the mitre saw you have already chosen.
To sum up, we believe that understanding the way of how to use a mitre saw is no longer tricky as long as you have read our article and do all the steps correctly. Now, do not hesitate and immediately grab this saw to start your DIY project.